SOLAROX® HighCRI Power LED Strip PRO II with Samsung LEDs neutral white 4000K - 5m-reel

• SOLAROX® HighCRI Power LED Strip PRO II with Samsung LEDs neutral white 4000K - 5m-reel

Product description

Ideal for high quality and professional standards. The SOLAROX® High CRI Power LED Strips set new standards for high-quality lighting solutions, where natural color reproduction, high efficiency and long lifetime are required. This is achieved by using modern Samsung LEDs and sophisticated electronics. No resistors but constant current sources with temperature sensors are used for the LEDs. Thus the strips are less sensitive to voltage swing and provide an uniform brightness over the entire length. For LED protection the current will reduced if ambient temperature becomes too high. The circuit is optimally designed in interest of a long lifetime. The high color rendering index (CRI typ. 85Ra) lets appear the light very naturally in the living environment.

Properties:

• Natural color reproduction of illuminated objects thanks to high color rendering index (typ. 85Ra)
• Luminosity up to 2030 lm/m
• High efficiency of 140 lm/W
• 70 LEDs per meter
• Using constant current sources instead ordinary resistors
• Protection circuit against overtemperature
• Constant brightness over the entire length
• Wide operating voltage range of 22V...30V (ideal for 24V vehicle electrical systems)

Applications:

• High quality residential lighting
• Yachts, boats, trucks, buses
• Cabinet lighting

Select one of the following power supplies:

• up to 1m: SOLAROX 24V 0.63A (not dimmable)
• up to 2m: SOLAROX 24V 1.25A (not dimmable)
• up to 5m: SOLAROX 24V 3.75A (not dimmable) / OSRAM OTi DALI 80/220-240/24 1-4 CH (DALI dimmable)
• up to 8m: SOLAROX 24V 5A (not dimmable) / OSRAM OT 130/220-240/24 DIM P (1-10V dimmable)
• up to 15m: MEANWELL 24V 10A (not dimmable) / OSRAM OT 250/220-240/24 DIM P (1-10V dimmable)

The Strip is dimmable using a LED dimmer. Suitable dimmers can be found here. Make sure the output current (Amperes) of the dimmer is sufficient!

Specifications

Notes

• The Strip is separable every 10cms (7 LEDs). The divided sections can be reconnected with the Connector cable for 10mm single color LED strips (# 7010140) or soldering wires. A comfortable feeding allows the Feeder cable for 10mm single color LED strips (#7010110). The backside is a 3M Scotch tape for a fast mounting. Please make sure the surface is flat, clean and dry!
• Pay attention for multiple voltage feeding if total length is greater than 5m.
• The strips should be attached on a metallic surface for better heat dissipation.